Surfaces on the Motcomb Street stucco
The coat belongs on stucco that is already part of a painted front. That includes the Pantechnicon's surviving stucco frontage and its screen of giant Greek Doric columns, the channelled stucco around the arched display window at No. 14, the simple stucco shopfront at No. 2, and the simple stucco buildings whose shop frontages line the street. Each of those is a different surface even when the colour will be close. A column shaft, a channelled pier and a plain bay above a shop do not get one note in the schedule that says only 'stucco'. The painter names the face, the condition of the existing coat, and whether the render under it is sound.
What stays unpainted is equally part of the surface list. Paint or stain is not applied to facing brickwork, stonework or terracotta unless that application has been approved. A Greek Doric column on this front is part of the stucco frontage, and it is treated as stucco. A stone dressing, a stone cill or any terracotta that is not already a painted surface is not quietly included because it sits in the same view. Glazing is masked, not coated. Ironmongery that must keep moving is protected or taken off and put back, rather than painted into a shut position. The wall above a shopfront and the joinery of that shopfront remain separate items.
Elevation detail, from the column screen to the shop
The dominant piece of elevation is the screen of giant Greek Doric columns on the Pantechnicon front that remained after the fire in 1874. No. 19 is the listed building of about 1830 whose front was kept when the rest was rebuilt. Decoration follows that screen. Flutes, capitals and the stucco they sit in have to read as a screen when the work is finished, which means paint is not flooded into the flutes until the modelling disappears, and the junction between column and wall is cut in rather than bridged with a heavy coat. The painter is looking at a surviving front, not at a flat panel of render.
No. 14 is Grade II, and its large arched display window is set in channelled stucco, with a square-headed side entrance beside it. The channels are the detail. If they are filled, rounded off or lost under a thick film, the elevation the listing describes has been simplified by a decorating job, which is not the brief. No. 2, also Grade II, is a simple stucco shopfront: an arched central display window, flanked by shop and house doorways with square-headed fanlights. Those arches and the square heads are elevation geometry. The plainer stucco buildings with shop frontages still have a line where the shopfront stops and the wall above begins, and that line is kept.
Preparation before the stucco is recoated
Preparation starts with a record, not with a scraper. Failed coatings are noted against damaged render, because a coat that has let go over sound stucco is a different task from render that is loose, cracked or hollow. The first can be prepared for a new system. The second is a repair, and it is written as a repair so that paint is not asked to hide it. Sound existing paint on the columns and on the plain bays is not stripped back as a habit. Channelled stucco at No. 14 is raked out only where the channels themselves are choked or the coating is unsound, and the profile is kept.
Shopfront joinery is prepared on its own. The arched display windows, the square-headed fanlights and the doorways at No. 2 are timber or joinery items in a stucco opening, and they are not rubbed down as if they were the wall. Glazing is protected before any preparation that could scratch or cloud it. Door edges, thresholds and the moving parts of fanlights are kept free, so that a freshly coated door still closes and a fanlight still opens. Colour samples go on the actual stucco, in the light of the street, and they are judged there before the specification is treated as agreed. A sample on a board indoors is not a sample of this front.
Consent for like-for-like redecoration
No. 2, No. 14 and No. 19 are Grade II. Like-for-like external redecoration, matching paint type, texture, finish and colour, usually does not need listed building consent. That is the ordinary path for a further coat on stucco that is already painted in a known system. It is not a path for a change of type, a change from a matt surface to a gloss one, a change of texture, or a colour that does not match. If the instruction is to alter any of those, the consent question is a different one and it is asked before the paint is ordered. The quotation should say which instruction is being followed, in words, with no figure invented on this page.
Painting stone is not that like-for-like case. No paint or stain is to be applied to facing brickwork, stonework or terracotta unless it has been approved. A decorator who finds an unpainted stone band, a stone pier or a terracotta detail on the same elevation stops and records it. Approval is a prior decision, not a note added after the face has been coated. The column screen stays in the stucco schedule. Anything that is actually stone stays out of the paint schedule until someone with authority to approve has said otherwise. The site visit is where those faces are separated.
Access from the footway
The columns are a giant order on a street of shops, so the upper front is not reached by standing at the stall board. Access has to be planned to the height of the screen and to the stucco above the shop frontages, while the arched windows and doorways at ground level remain readable and, where the shops are trading, usable. Entrances at No. 2, the side entrance at No. 14 and the openings in the simple stucco buildings are kept as routes, not as storage. Protection runs across thresholds, glazing and any stall board that sits under the work.
Where a scaffold stands on the footway, a Westminster pavement licence is required for that address. The licence is part of access, and it is named in the plan. This page does not attach a cost to it. A scaffold that only serves the painting is still a scaffold on the public footway, and it is not treated as an informal ladder. The quotation separates the painting of the stucco from the access that makes the upper front reachable, so that a change in how the footway is occupied does not silently change the decorating scope.
Cost factors, with no figure
What changes the cost is the amount of work the front actually demands, and this page states none of it as a figure. A plain bay of sound stucco is not the same task as the giant Greek Doric screen, where flutes and capitals have to be coated without losing the modelling. Channelled stucco at No. 14 takes a different preparation from a smooth face. Failed coatings over damaged render add a repair line that sound paint does not. Joinery at the arched windows, fanlights and doorways is a separate body of work from the wall above. Each of those differences belongs in the scope.
Access changes the cost as well, still without a number being offered here. Reaching the surviving front of No. 19, protecting glazing, keeping shop doorways usable and obtaining a pavement licence where the scaffold stands on the footway are all factors. So is the question of whether the coat is truly like-for-like or whether a change of colour, type or texture has pushed the job into a consent discussion that must be settled first. Samples, masking and the care needed not to paint stone are factors too. None of them is turned into a figure on this page.
A written itemised quotation after the site visit
The quotation is written after someone has stood in front of the elevation. A photograph of the column screen can show that the Pantechnicon front is there. It cannot show whether a flute is choked, whether render under a failed coat is loose, or whether a band that looks pale is stone rather than stucco. The visit records No. 19, No. 14 and No. 2 as separate items, plus the simple stucco buildings that are actually in the instruction. Anything not seen is left out, not guessed.
The written quotation is itemised. Preparation of stucco, repair of damaged render, coatings for the column screen, coatings for channelled and plain faces, joinery to the shopfronts, protection of glazing, and access including a footway scaffold where one is needed, each have a line. Exclusions are written too: unpainted stone, brick and terracotta left alone unless approval exists, and any structural repair that decoration does not include. Like-for-like is stated as a match of type, texture, finish and colour, or the quotation says that the instruction is not that match. No figure is invented before that visit.
Sources
Questions about this decorating work
What is coated on the Pantechnicon front, and what is left alone?
The surface in front of the painter is the surviving stucco frontage, including the screen of giant Greek Doric columns. No. 19 is Grade II, about 1830, and was rebuilt except for that front after the fire in 1874. The coat belongs on that painted stucco. Facing stonework, brickwork and terracotta are not given paint or stain unless approval has been given. Shopfront joinery is a separate item from the wall and the column screen. A failed coating is recorded against damaged render before a new system is chosen, and the colour is sampled on the stucco.
Does like-for-like repainting of these listed fronts need consent?
No. 2, No. 14 and No. 19 are Grade II. Like-for-like external redecoration that matches paint type, texture, finish and colour usually does not need listed building consent. That is a further coat on stucco already painted in a matching system, not a change of sheen, texture or colour, and not a first coat on stone. Paint or stain is not applied to facing brickwork, stonework or terracotta unless it has been approved. The quotation should say whether the instruction is truly a match. If it is not, the consent question is settled before paint is ordered.
How should the channelled stucco at No. 14 be prepared?
No. 14 is Grade II. Its large arched display window sits in channelled stucco, with a square-headed side entrance beside it. Preparation keeps those channels legible. Failed coating is recorded against any damaged render, and only the unsound material is taken back. Sound paint is not stripped for its own sake, and the channels are not filled or rounded until the modelling has gone. Glazing in the arched window is protected. The side doorway is kept free to move. Joinery is prepared apart from the stucco wall. A colour sample is put on the channelled face, in the light of the street, before the coating is treated as agreed.
Read next
- Motcomb Street and the Pantechnicon stucco front in London. The street page sets out the stucco front this decorating work has to read.
- Shopfront painting on Motcomb Street, Belgravia in London. Shopfront joinery on the same street is specified apart from the wall above it.
- Exterior painting. The wider exterior service covers stucco, render and the access questions that sit with them.
- Preparing Belgravia stucco before it is repainted in London. That guide stays with preparation of stucco that is already painted, including where a coating has failed.
When the column screen, the channelled bays and the shopfront joinery have been seen on site, ask for a written Motcomb Street exterior quotation. It should itemise preparation, coatings, repairs and footway access, and it should not invent a figure from the pavement.