Preparation where the blocks do not share a coating history
Each block is surveyed on its own. Early brick-and-stucco houses and later full stucco do not offer the same substrate, even when both face the square. Cracks are recorded apart from failed coating, and damaged render is recorded apart from both. A dentil or a swag that has lost its edge is not logged as ordinary peeling. The wall is washed. Loose material is cut back. Filling stays only where the substrate allows, so a pedimented first-floor window keeps its profile. Bare patches are primed. The coating has to be compatible with the paint already on that block.
Old paint is left where it is sound. Lead pigments were widely used until the 1960s, and leaded paint is not overheated with blow lamps or gas torches. Strip only paint that is flaking, chipping or dusting. On a bottle-balustraded balcony, heat is the wrong way to clear a coating, and taking sound paint off a baluster softens the shape. Steps and basement areas below the work are protected before any of that cutting back begins. Debris does not belong in the area behind the railings.
Colour, sheen and black railings
Stucco colour and railing colour are different specifications. Railings throughout the conservation area are painted black, and that consistent black is part of their character. The same pattern of railings runs along Eaton Square. They are not given the wall colour, and the wall is not given the black. A sample of the stucco colour is put on the wall of the block in question, because a north-side Cubitt front and a south-side Smith front may not be the same cream once the dirt is washed off. The sample is judged in daylight on the elevation, not from a card.
Sheen is agreed with the colour. A change from a matt finish to a gloss finish may need listed building consent, and it will also change how dentils, swags and a pediment read. Like-for-like work keeps paint type, texture, finish and colour together. The black on the railings is its own coating, specified apart from the masonry film. If a balcony mixes a balustrade with iron, each material is sampled and coated on its own line. A wet edge pulled across both is how a black railing stains a pale cornice.
Consent when the finish would change
Like-for-like recoating of an already painted listed surface usually does not need listed building consent, provided paint type, texture, finish and colour all match. That test is applied per block. An early brick-and-stucco house and a fully stuccoed neighbour can both be listed and still present different existing finishes. Painting a surface that is currently unpainted may need consent. Brick that has never been coated, or a stone dressing that is bare, is not brought into the stucco specification to make the terrace look even.
A change from matt to gloss is its own consent question, including on a moulded cornice of about 1850 where a shine would pick out every repair. Consent for the wall does not decide the railings, and the established black of the railings is not evidence that a new colour on the stucco is approved. Papers for the house, and any estate colour note, are read before the sample is treated as final. The through-route in front of the terrace does not change those checks.
Access beside six railed enclosures
Eaton Square is subdivided into six railed enclosures, and the King's Road runs through the centre. Access for painting has to live with that layout. Railings, basement areas and entrance steps sit between the footway and the stucco. They are protected, and they are not used as a working platform. The bottle-balustraded balconies and the cornices need a way of reaching them that does not load the balcony itself. Faces of railings that turn toward the garden need a route that is agreed, not assumed from the pavement.
If a scaffold stands on the footway, check whether a Westminster pavement licence is required. That is a permission to confirm. It is not listed building consent. The six enclosures make the pavement condition change along the square, so the check belongs to the actual frontage, not to the square as a whole. Washing water and loose material are kept out of the basement areas while that access is in place.
What drives cost from block to block
The 30-year build is a cost factor because the detailing is irregular. A later cornice with dentils and swags, a bottle-balustraded balcony and pedimented first-floor windows are more preparation than a plainer early bay. Failed coating, open cracks and damaged render are not the same kind of work even on the same house. Brick-and-stucco elevations add the labour of keeping bare brick out of the painted area. Full stucco later in the square adds area, but it is not automatically the heavier repair.
Access and consent sit on top of the surface. Six railed enclosures, a road through the centre, protection of steps and basement areas, and a possible scaffold on the footway all change the job. So does old paint that can stay, against paint that is flaking, chipping or dusting and must be removed without burning. Railings painted black are a separate metal line. These are factors only. The visit turns them into an itemised scope, and no figure is implied by the age of the block.
How the quotation is itemised
A site visit comes first, on the block that is actually in scope, not by copying the neighbour. The notes separate early brick and stucco from later full stucco, and they separate the cornice, the balcony, the flat wall and the railings. Cracks, failed coating and damaged render are itemised apart. The written quotation lists preparation, the compatible coating, priming of bare patches, protection, and access. Black railing paint is its own line. Stucco repairs that are not decorating are excluded or described as such.
The quotation also states what is still unchecked. Like-for-like recoating can usually proceed without listed building consent. Painting a bare surface, or moving from matt to gloss, is left out until that question is answered. If the scaffold would stand on the footway, the paper notes that a Westminster pavement licence has to be checked. Colour is sampled on the wall before it is written in. The result is a quotation for this front, not for the whole 30-year square.
Early brick and stucco, later full stucco
The earliest properties are in brick and stucco. Later buildings are fully in stucco, and different builders worked on different terrace groups. On this square that split follows the builders: Cubitt and his sons mostly on the north side, Seth Smith largely on the south. A decorating specification that assumes a shared film, a shared failure pattern and a shared previous colour will miss the join. The survey says which parts of the elevation are painted stucco, which are bare brick, and which belong to a balcony or a cornice of about 1850.
Italianate detail on the later blocks is the fragile part of the surface. The bottle-balustraded balcony, the pedimented first-floor windows and the moulded cornice with dentils and swags each take filler and paint differently from the wall below. Cutting back stops at sound material. The coating does not bridge a crack that should stay visible as a repair, and it does not bury a swag. Railings in front of these blocks stay in the black specified for railings, whatever the stucco sample shows.
Sources
Questions about this decorating work
Why might neighbouring blocks on Eaton Square need different coating specifications?
The north side is mostly Thomas Cubitt and his sons, and the south side was largely built by Seth Smith. The earliest houses are brick and stucco, and later buildings are fully stucco, with irregular detail from a 30-year build. A later block can carry a bottle-balustraded balcony, pedimented first-floor windows and a moulded cornice with dentils and swags, of about 1850. Those surfaces do not share a coating history with a plainer early bay. Survey each block, and do not copy the neighbour's film because the square reads as a single place.
Are the railings painted with the stucco?
No. Railings are painted black, and that consistent colour is part of their character. Eaton Square is subdivided into six railed enclosures, and the same pattern of railings runs along the square. They are specified apart from the wall. Protect the basement areas and the steps while the railings are prepared, and do not let black coating run onto stucco. A sample of the wall colour goes on the wall. The metal keeps its own coating, including on the faces that turn toward the garden rather than toward the King's Road.
When is old paint left on the elevation?
Sound old paint stays. Lead pigments were widely used until the 1960s, and leaded paint must not be overheated with blow lamps or gas torches. Strip paint only if it is flaking, chipping or dusting. Record that failed film separately from cracks and from damaged render, including on a cornice with dentils and swags, where taking off sound paint blunts the ornament. Wash, cut back loose material, fill only where the substrate allows, prime bare patches, and choose a coating compatible with what remains.
Read next
- Eaton Square. The square as a place, including the north side and the south side as different builds.
- Exterior painting. How preparation, coating and access are separated on a street elevation.
- Exterior painting on Belgrave Square. First-rate stucco on the neighbouring square, with its own colour and access brief.
- Repainting railings and basements. Black railings and open basement areas as their own decorating lines.
Bring the block, the balcony and the railing faces into the same enquiry, then ask for an Eaton Square elevation quotation. A site visit produces a written itemised quotation for that front, with no figure guessed from the neighbouring terrace.