Doors, fanlights and sashes

Woodwork painting on Chester Street

The joinery is where a Chester Street elevation does its talking. These late Georgian connecting streets have a stucco base, panelled doors with large decorative fanlights, decorative ironwork to balconies, simple straight parapets and no stucco decoration to the upper floors. With nothing applied above, the doorcase and the windows carry the whole front.

The street is dated 1805 in Westminster's designation report, with Chapel Street at 1775-1811 and Wilton Street at 1817, and Nos. 8-14 Chester Street date from the 1810s. One door here is illustrated with a large radial fanlight and a gas lamp holder. Across the area, most terraced houses have single-glazed timber sliding sashes, recessed in the reveal and painted white, most commonly square-headed and six-over-six, and front doors are painted timber and panelled.

Why the doorcase carries the elevation

The record for these streets is specific about what is absent: no stucco decoration to the upper floors, and simple straight parapets. What is present is a stucco base, panelled doors with large decorative fanlights and decorative ironwork to balconies. Remove the doorcase from that description and very little is left to look at.

That changes the emphasis of a decorating brief. On a first-rate square the stucco ornament dominates; here the door, its fanlight and the sashes are the detail. A schedule that lists a front door as one line and a window as another has already missed most of the work.

The radial fanlight and the gas lamp holder

A Chester Street door is illustrated with a large radial fanlight and a gas lamp holder. The bars of a radial fanlight run as rays from the centre, which means a great many narrow painted edges in a small area and no flat field to hide an uneven coat.

The holder is a later fitting that has survived, and it is recorded before preparation starts rather than discovered afterwards. Fanlights of this kind are among the details the audit says contribute significantly to character, and the council encourages the repair and retention of original doors and windows throughout the conservation area.

Panelled doors on a street of 1805

Front doors in the area are painted timber and panelled, and these streets are credited with panelled doors carrying large decorative fanlights. The street is dated 1805, with Nos. 8-14 from the 1810s, so the joinery sits in a late Georgian idiom rather than a Victorian one.

A panelled door is a set of faces, not a slab: panels, muntins, rails, stiles, mouldings, edges and the frame around it. Each is listed. The edge that meets the frame is the one that decides whether the door still closes cleanly once the coating has cured.

At the threshold: the lamp and the bootscraper

The doorcase is not only joinery. A lamp stands over the entrance steps to a Chester Street house, and bootscrapers survive at 25 Chester Street and on Eaton Square. Both sit within arm's reach of a door that is being prepared and painted.

Those items are recorded before work begins and protected while it goes on, because the usual way they are lost is not weather but a careless hour of stripping. They are listed as metalwork, separate from the timber, so that nobody assumes a coat of door paint covers them or that cleaning the door means cleaning them too.

Sashes, reveals and the area pattern

Most terraced houses in the conservation area have single-glazed timber sliding sashes, recessed within the window reveal and painted white, most commonly square-headed and six-over-six. That is the area pattern, and it is written into a quotation only where the window in front of you actually has it.

On a brick front with a stucco base, the sash sits back in the reveal, so the reveal is part of the job even though it is masonry. The sash itself has a meeting rail, a cill, glazing bars and a frame. Paint across the running surfaces is what stops a sash sliding, so the box, the staff bead and the parting bead are treated as moving parts.

Colour and finish on the joinery

Westminster's guidance is direct: fairface brickwork should never be painted, and timber door and window frames should be painted to match the prevailing pattern, generally gloss white or on some buildings black. The prevailing pattern on the street is established from the adjoining houses before a sample is made.

The sample itself goes on the joinery, in the reveal where the light is different from the open face, not on a loose board indoors. A change of paint finish, such as matt to gloss, is listed by Historic England as a change that would usually need listed building consent, so sheen is agreed at the same time as colour rather than left to the tin.

Consent, and timber that is already painted

Like-for-like external redecoration of a listed building, matching paint type, texture, finish and colour, usually does not need listed building consent. A white sash that is already white and a panelled door that is already painted sit in that ordinary case when the new coat matches what is there.

Painting a currently unpainted surface on a listed building is likely to need consent. A bare bead, an unpainted section of fanlight framing, or a face that has never carried paint is flagged rather than coated. On the Grosvenor estate there is a separate requirement that doors, garage doors, window frames, sashes and casements be of timber, which is about replacement rather than redecoration but belongs in the same conversation.

Preparation without heat, and what drives the cost

Lead pigments were widely used in household paints until the 1960s, so old joinery films may contain lead. Leaded paint must not be overheated with blow lamps or gas torches. Sound old paint is left in place, and only flaking, chipping or dusting paint is stripped back, then bare patches are primed. Regular maintenance and painting of timber doors and windows is described as essential to stop decay flourishing.

Cost follows the pieces. A radial fanlight is many narrow bars; a six-over-six sash is more bars again; a panelled door is a set of faces. Decayed timber, a failed joint or a soft cill is a repair rather than a coating line, and is itemised or excluded. Access to upper sashes, protection of steps and the basement area, and consent still to be confirmed all change the scope. Factors only, with no figures attached.

Sources

Questions about this decorating work

What is a radial fanlight and why does it need care?

It is a fanlight whose glazing bars run outward from a centre like rays, and the audit illustrates one on a Chester Street door together with a gas lamp holder. The difficulty is that all the detail is in narrow bars. Successive coats thicken them until the pattern stops reading from the pavement, and aggressive stripping can take the bars or the surviving holder with it. So the holder and the bar pattern are recorded first, sound paint is left in place, only loose paint is cut back, and the coating is kept thin enough on the bars that the geometry still reads.

What colour should the sashes and doors be?

The prevailing pattern on the street, established from the adjoining houses. Westminster's guidance says timber door and window frames should be painted to match the prevailing pattern, generally gloss white or on some buildings black, and that fairface brickwork should never be painted. The audit separately records that most terraced houses have single-glazed timber sliding sashes, recessed in the reveal and painted white, and that front doors are of painted timber and panelled. Sheen is agreed with colour, because a change of paint finish from matt to gloss is one of the changes that would usually need listed building consent.

Can old paint be burned off a Chester Street door?

No. Lead pigments were widely used in household paints until the 1960s, so older joinery coatings may contain lead, and leaded paint must not be overheated with blow lamps or gas torches. The approach is to leave sound old paint in place, strip only paint that is flaking, chipping or dusting, prime bare patches and use a coating compatible with what remains. On a door of this date, with a large decorative fanlight above it, that limit also protects the profile. Decayed timber is a repair, not something a coat of paint resolves.

Read next

  • Chester Street. The street of 1805, its railings and its stucco base, read before the joinery.
  • Woodwork painting. How doors, sashes and frames are listed face by face.
  • Repainting timber sash windows. White sliding sashes recessed in the reveal, and keeping them moving.
  • Wilton Place. The other street named in the designation report, with a Tuscan portico.
  • Eaton Terrace. Where the audit illustrates the other railing patterns alongside this street.

List the doors, fanlights and sashes you want covered, then ask for a Chester Street joinery quotation. Bare timber, decayed timber and ordinary recoating are kept apart on the paperwork.

Start with the details

Tell us what needs decorating.

Share the property location, the surfaces involved and the finish you have in mind.

An enquiry starts a discussion. Scope, appointments and any instruction to proceed are agreed directly.

Your enquiry

The form sends your message to Hampstead Renovations.

Prefer to talk? Call 020 7101 3168 or WhatsApp 07459 345456.

Read our privacy policy about how we handle your enquiry.

CallWhatsAppQuote