The white sash set back in the reveal
The audit's typical window is specific enough to write into a specification without invention. It is a timber sliding sash, single glazed, recessed within the window reveal, and painted white. Sliding means an upper and a lower sash that move past each other. Single glazed means one sheet of glass in each pane opening, not a later double-glazed unit, unless a particular window has already been changed and the brief says so. Recessed in the reveal means the box and the sash sit back from the face of the stucco or brick. White is the colour the audit records for these sashes across most terraced houses. A brief that asks for a stained hardwood window, or for a window brought forward to the face of the wall, is asking for a different building.
Recession changes the painting. There is a reveal, often in stucco, meeting a timber frame. There are internal corners where the sash style meets the parting bead, and there is a meeting rail that only gets a proper coat if the sash can move a little. The white is continuous across those timber parts so that the opening reads as one pale frame inside a heavier wall. Paint that stops at the easiest edge, leaving the soffit of the reveal or the underside of the meeting rail, is unfinished even if the outside face looks bright. The first note on any Belgravia sash is therefore the audit's note: timber, sliding, single glazed, recessed, white. Everything later in this guide is a variation on that, or a warning about how not to harm it.
Square-headed and six-over-six
The sashes are found in a variety of configurations, but most commonly they are square-headed, six-over-six sashes. Square-headed means the opening is not an arch. Six-over-six means each sash is divided into six panes, a grid that gives the terrace its rhythm when several houses are seen together. Variety is the audit's other word, so a painter records the openings that are not the common type instead of repainting them as if the glazing bars ought to match a neighbour. A different pane count, a different head, or a window that has lost its bars, all belong in the notes. The common type is a starting description of the area, not a template forced onto every hole in the wall.
Glazing bars are where sash painting becomes slow, and they are where decay and thick paint do the most harm. Each bar has edges that face the weather and edges that face the glass. A six-over-six sash multiplies those edges. Preparation that rounds them off, or paint that fills the angle beside the glass, changes the fineness the configuration depends on. This guide does not set a coat count and does not name a product. It says that the common Belgravia sash is square-headed and six-over-six, and that repainting should leave that grid readable. Where a sash is a different configuration, the same care applies to whatever bars are actually there. Inventing missing bars is joinery, not painting, and it is outside this guide.
Side lights on Chester Square
Chester Square includes sash windows with side lights. A side light is a glazed light beside the sliding sash, part of the same opening rather than a separate window forgotten at the edge of the bay. If the specification says sash and the painter coats only the moving leaves, the side lights remain a different colour or a different standard of preparation, and the opening looks unfinished. The side lights are usually fixed. They still have timber, glass and a junction with the main frame. They still need the same decision about sound paint and failed paint. They should be listed with the sash they belong to, not discovered at the end of the job.
Side lights also change access within the opening. There is more timber at the sides, and the junction between the side light and the sliding sash is a line that collects failed paint. Record each Chester Square opening as sash alone, or sash with side lights, before talking about colour. The wider area's white still applies to the timber of the opening unless a listed-building comparison says the existing finish is something else that must be matched. The audit's fact is modest and it is enough: these windows have side lights, so a Belgravia sash specification that assumes every opening is only two sliding leaves will under-describe Chester Square. Write the side lights down. Paint them with the sash. Do not treat them as wall.
Flush sashes on Ebury Street
Flush sash windows mark the earlier date of the Georgian properties on Ebury Street. They contrast with the majority of terraces in Belgravia, where the sash is recessed in the reveal. Flush means the frame sits in the plane of the brick face rather than back inside a deep reveal. That single difference changes both the look of the house and the way it is painted. There is less reveal to coat, a closer junction between brick and timber, and a greater risk of getting paint onto a brick face that should remain brick. The flush sash is not an incomplete version of the recessed Belgravia sash. It is the detail that tells you the house is earlier.
The houses themselves are early. Nos. 162-170 Ebury Street were built between 1720 and 1740, with simple brick facades and flush sashes, and with the typical detail of that early Georgian date. They were standing long before the white recessed six-over-six sash became the common window of the later terraces. Repainting them includes the flush frame and the sash, in a colour and a sheen that respect what is there, especially if the building is listed and the finish must be matched. It does not include setting the sash back, adding a stucco reveal, or painting the simple brick facade in order to make the house look like a later terrace. The audit's contrast is the instruction. Flush on Ebury Street. Recessed on the majority of Belgravia terraces. Say which kind of opening the instruction covers.
Square-headed sashes on Elizabeth Street
Elizabeth Street has simple stock-brick terraces with square-headed sashes, a moulded cornice, and shops at ground floor set below cast-iron anthemion balconies. The sash fact to take from that sentence is the square head. It agrees with the common Belgravia type, and it sits in brick rather than in a fully stuccoed palace front. Above a shop, the sash may be the domestic window of an upper floor, with a shopfront of a different material below it. The painting specification should not slide from the sash down across the shopfront, or from the sash sideways onto the cast-iron balcony, unless those elements have been named. Square-headed timber is the window. The anthemion iron is metalwork. The stock brick is the wall.
Because the terraces are described as simple, the sash is a large part of the architecture. There may be less stucco modelling around the opening than on a square in the centre of Belgravia, so a poorly prepared sash is more exposed to view. Square-headed also means you should not expect an arched head unless you are looking at one and have written it down as a variation. Record the pane pattern rather than assuming six-over-six from the wider area, even though six-over-six is the common configuration. Elizabeth Street is included in this guide so that a brick terrace with shops is not given a stucco-square window specification by default. The sashes are timber, they are square-headed, and they need the same regular painting as any other timber window if decay is to be kept in check.
Sun blinds, blind boxes, and a black number nearby
External sun blinds and blind boxes are another detail found on some properties, in particular on Belgrave Square, Eaton Place and Lower Belgrave Street. They sit at the head of the window. A blind box is timber in many cases and is easy to fold into the sash specification without deciding whether it is included. It should be recorded on its own line. Say whether the box is painted with the white of the sash, left as it is, or excluded. Say whether a blind is present and whether it is to be protected rather than painted. The audit does not give a colour for the blind or the box. Inventing one is not part of preparation. Noticing that the box exists is.
A black-painted house number on the Doric column of the projecting porch at 42 Eaton Square is a door and porch fact, not a sash fact. It belongs in this guide only so that nobody copies that black onto the windows. The number is on a column of the porch. It is black. The sashes of the terraces are white. Near a porch, the painter meets black numerals, a painted door, and white window joinery within a few feet of each other. Those are different instructions. 42 Eaton Square is the example the audit records of that kind: black on the Doric column of the projecting porch. Use it as a reminder about nearby joinery colour. Do not use it as a description of the sash.
Timber sashes and casements
The Grosvenor specification requires doors, garage doors, window frames, sashes and casements to be of timber. For this guide the words that matter are window frames, sashes and casements. Repainting is the maintenance of that timber, not a stage on the way to a different material. A sash that is tired is not, by that fact alone, a sash that this guide proposes to throw away. Regular painting exists so that decay does not flourish and so that the life of the joinery is prolonged. Where timber has already failed, the failure should be recorded for a decision. This page does not describe a splice, a new cill, or a replacement window. It keeps the painter's work on the paint and on the limited easing needed to paint properly.
Casements are named beside sashes because not every timber window in the specification is a sliding sash. A casement, hinged at the side, still has to be timber if this requirement applies, and it still needs paint. The common Belgravia house window remains the sliding sash the audit describes. When a brief uses the word windows, ask which openings slide and which are casements, and include frames with both. Frames are listed separately from sashes and casements in the specification, which matches the way a painter meets them: the frame stays in the wall, the sash or casement moves. Both are timber. Both are in the scope of regular painting. Neither is a metal window that has been given a timber colour.
Ease the sash if it must move, and leave the cords
Some paint lines can only be reached if the sash moves. The meeting rail, the edges that pass the parting bead, and the parts of the frame hidden when the sash is shut are ordinary examples. If the sash must move, it is eased only as far as getting it to slide. Easing means freeing it from paint that has stuck the meeting surfaces, enough to do the painter's work, and then leaving it able to run. It does not mean taking the sash out, cutting the cords, or opening the weight pockets. A sash that is painted shut can often be freed at the stuck edge without becoming a joinery project. If it cannot, that fact is reported. It is not solved by an improvised dismantling.
Cords are recorded and nothing more, unless the brief expressly includes their replacement. A painter notes whether the cords are present, broken, or painted into a solid mass, because that affects whether the sash can be moved safely for decoration. Replacing cords, weights and pulleys is a separate instruction. This guide does not describe a method for that work and should not be read as one. Weights in particular are easy to discuss badly and dangerous to improvise. If the brief is repainting, the cords stay as they are, the sash is eased only if it must move, and the paint specification continues. If the brief later adds cord replacement, that addition needs its own scope. It is not hidden inside the word preparation.
Leave sound paint, and do not burn or dry sand
Regular painting keeps decay in check only if the preparation does not damage the timber it is meant to protect. Sound paint stays. The Health and Safety Executive's instruction on old paint is to strip it back only if it is flaking, chipping, giving off dust or particles, or a risk to children. A sound film on a sash stile or a glazing bar is not flaking and should not be taken to bare wood for the sake of a perfectly uniform substrate. Failed paint at a joint, a cill or a bar is a different note and can be taken back locally. The distinction is the whole of good sash preparation. Everything sound remains. Everything failed is recorded and limited to the failure.
Two prohibitions sit on top of that distinction, because older sash paint may contain lead. Lead pigments were widely used in household paints until the 1960s. Leaded paint must not be overheated with blow lamps or gas torches. There is no traditional exception in that sentence for a painter who is skilled with a flame. Flame and torch are out. Dry sanding of old paint is among the jobs that put people most at risk from lead dust, so open dry sanding of sashes, bars and boxes is out as well. Dust from a sash falls into the room behind it and onto the pavement in front of it. Preparation is hand work within those limits: leave sound paint, do not burn, do not dry sand. This guide does not replace that with a branded abrasive, a heat gun recipe, or a count of coats.
Listed joinery and a change of sheen
On a listed building, like-for-like external redecoration usually does not need listed building consent. Historic England describes that like-for-like work as matching paint type, texture, finish and colour, the sort of redecoration most listed buildings have already seen many times without affecting special interest. For a sash, the comparison is concrete. The type of paint now on the timber, the texture of that film, the finish, and the colour, set against what is proposed. White recessed sashes that are painted again in white, with the same finish, are the ordinary case the advice has in mind. A sash that is stripped to bare wood and given a different system is not ordinary merely because the window is still a window.
Historic England lists a change of finish as a change that would usually need listed building consent. The examples in that advice are a change from a matt finish to a gloss finish, from a smooth finish to a textured finish, or from limewash to paint. Sheen is therefore not a decorator's preference on listed joinery. If the existing sash is matt and the proposal is gloss, the advice treats that as a change requiring consent, even when the colour stays white and the sash stays timber. The same is true of a move from a smooth film to a textured one. Record the present finish in the notes, in words a conservation officer and a painter would both recognise, and do not let a specification quietly upgrade the sheen. On unlisted joinery the estate and the audit may still expect white. On listed joinery the sheen is part of the consent test as well.
Sources
- Westminster City Council, Belgravia Conservation Area Audit (consultation draft, 2013)
- Grosvenor, The Grosvenor Specification (March 2025)
- HSE, Construction hazardous substances: Lead
- HSE, Old lead paint: what you need to know as a busy builder (CIS79)
- Historic England, Listed Building Consent (Historic England Advice Note 16)
Questions this guide answers
What does a typical Belgravia sash look like?
Most terraced houses have single-glazed timber sliding sashes, recessed in the window reveal and painted white. Configurations vary, but the common one is a square-headed six-over-six sash. Square-headed means you should not assume an arch. Six-over-six means a grid of panes, with bars that need paint on their edges if the grid is to stay crisp. Recession means the frame sits back from the wall, so the reveal is part of the opening and part of the specification. White is the recorded colour. Side lights, flush frames and blind boxes are variations on particular streets, and they are added to the note when they are present. They do not replace the common description.
Are the windows on Ebury Street the same as a stucco-terrace sash?
They are not. Flush sash windows are how the audit marks the earlier date of the Georgian properties on Ebury Street, in contrast with the majority of Belgravia terraces, whose sashes are recessed in the reveal. Nos. 162-170 were built between 1720 and 1740 and have simple brick facades as well as those flush sashes. The timber still needs regular painting so that decay is not allowed to flourish, and sashes and frames are still required to be of timber. What changes is the position of the frame. There is no deep stucco reveal of the later type. Flush and recessed openings are recorded as different cases.
Will repainting include new sash cords or weights?
Not unless the brief says so. A painter may need the sash to move in order to reach the meeting rail and the edges hidden when the window is shut, and then the sash is eased only until it will slide. Cords are recorded, because a broken or seized cord changes whether the sash can be moved safely, but recording is not replacement. This guide does not set out a way to replace cords, weights or pulleys, and that work must not be inferred from the word preparation. Weights are left alone. If cord replacement is wanted, it has to be written as its own item.
Can the sheen on a listed sash be changed?
A change of sheen usually needs listed building consent. Historic England treats like-for-like redecoration, matching paint type, texture, finish and colour, as work that generally would not affect special interest and so would not need consent. The same advice names a change of finish as something that usually does need consent: matt to gloss, smooth to textured, and limewash to paint. A white sash painted white again, with the same finish, can sit in the like-for-like case. A white sash moved from matt to gloss cannot, even though the colour word has not changed and the window remains timber. Write down the finish that is there before a specification offers a glossier one.
Read next
- Woodwork painting. Doors, frames and sashes specified as timber, with sound paint left where it is sound.
- Chester Square woodwork. Sash windows with side lights, which belong in the same opening as the sliding leaves.
- Ebury Street exteriors. Flush sashes and simple brick on the early houses, including nos. 162-170.
- Eaton Place. A street where external sun blinds and blind boxes are among the details to record at the window head.
- Preparing stucco. The wall around the sash, including channelled ground floors that meet a recessed frame.
When each sash, side light and blind box is listed, request a quotation for repainting timber sash windows. We will see which openings actually move before the scope is fixed.